Thanks a lot.it is worked.i can program in psoc5 with bootloader host.now i want to replace bootloader host by gsm.and update firmware over the air.can you help me how i can do it?
There are many ways how your board can connect to your system via gsm,2G,... modem, and how you communicate with it on your host side (?). Is it TCP/IP channel or also serial UART like?
I am using M95(2G) quectel.psoc5 is connecting to gsm with uart.Connection network is MQTT (tcp).
how i can programming with bootloader on gsm side?
thank you for attention...