- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I want to create simultaneous iBeacon & Eddystone Beacon using PSoC4.
The plan is the dynamically update Advertisement data after every advertisement period in my case it is 150ms.
Took reference from Dynamic broadcaster project and I am able to achieve it. Attaching the source for it.
But I need it to be as power efficient as possible. What should be the best approach to do it?
One option is to after advertisement is finished I update the Advertisement packet and put system in deep sleep. Then again wake up and repeat after each advertisement.
Is there any reference code available to do so?
How do I periodically wake up the controller from standby and go back to sleep? Using some timer or are there any events generated by BLE stack that I can use?
I am expecting no substantial increase in current compared to regular advertisement and CPU in deep sleep.
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Jitendra,
The application specific code for achieving the lowest possible power consumption for BLE applications is already implemented in this project.
However, there are some few other options which could be used to decrease the power consumption further for PSoC 4 devices. Please refer the below application note ,section "Power Reduction Techniques" for details.
http://www.cypress.com/file/121271/download
-Gyan
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Can you make sure on your side the advertising packet is updated only once during a intact advertising interval?
what's the current power consumption compared with the regular advertisement without updating packets?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Jitendra,
The application specific code for achieving the lowest possible power consumption for BLE applications is already implemented in this project.
However, there are some few other options which could be used to decrease the power consumption further for PSoC 4 devices. Please refer the below application note ,section "Power Reduction Techniques" for details.
http://www.cypress.com/file/121271/download
-Gyan