- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I want to test the kit(CYW954907EVAL 1F) WLAN 802.11ac @80MHz and 160MHz bandwidths.Could you please help me how to set the commands or send the batch files
Thanks&Regards,
harshini
Solved! Go to Solution.
- Labels:
-
Manufacturing and Test
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Harshini,
If you check the 54907 datasheet http://www.cypress.com/file/407801/download , you can see only 80 MHz channels are supported. Please use the attached batch file to check the 80 MHz transmit testing. This script is written keeping in mind that you are using a mfg test fw by downloading test.mfg_test application in your CYW954907AEVAL1F kit. You can put this script in C:\Users\rroy\Documents\WICED-Studio-6.2.1\43xxx_Wi-Fi\libraries\test\wl_tool\scripts location and please modify the serial port before running the script.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Harshini,
If you check the 54907 datasheet http://www.cypress.com/file/407801/download , you can see only 80 MHz channels are supported. Please use the attached batch file to check the 80 MHz transmit testing. This script is written keeping in mind that you are using a mfg test fw by downloading test.mfg_test application in your CYW954907AEVAL1F kit. You can put this script in C:\Users\rroy\Documents\WICED-Studio-6.2.1\43xxx_Wi-Fi\libraries\test\wl_tool\scripts location and please modify the serial port before running the script.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks a lot. I will try with that script
Thanks&Regards,
Harshini