- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I'm working with flash S25FL256LAGMFI003, SPI single mode, and I'm trying to write 1 to CRV[1] to enable 4 byte address mode.
In the datasheet in page 60 Table 41 the description of the command WRR (0x01) says: Write Register (Status-1 and Configuration- 1,2,3). But I need to write only to Configuration Register 2. How can I do that? Can you tell me the sequence of operations please?
Is there a ready command for this in your general driver slld_v16.2.1.zip ?slld_v16.2.1.zip
Thanks
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
You can use WRAR (71h) command to update individual registers. Please see page 94 of datasheet for more details.
Datasheet: http://www.cypress.com/file/192131/download .
Thanks and Regards,
Sudheesh
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
You can use WRAR (71h) command to update individual registers. Please see page 94 of datasheet for more details.
Datasheet: http://www.cypress.com/file/192131/download .
Thanks and Regards,
Sudheesh