2 Replies Latest reply on Dec 14, 2018 11:19 AM by ToIn_1742091

    Download to the module CYW943907AEVAL1F takes long time


      Hello Support,


      I am evaluating the module CYW943907AEVAL1F. I am using the WICED IDE version

      I am using the target as "snip.tcp_client-CYW943907AEVAL1F-ThreadX-NetX download run" in the make target after double-clicking on the clean(steps mentioned in the Quick Start Guide).

      But this process is taking a too long time(~3-4 minutes). Is there any other way to download the created binary(.elf) file to the module through  any command-line or any other software(in Windows  PC)? so that time for loading the code into  the module can be reduced.




        • 1. Re: Download to the module CYW943907AEVAL1F takes long time


          There is no other way of programming the board using USB, you will have to use WICED to program the board

          • 2. Re: Download to the module CYW943907AEVAL1F takes long time

            If you are using FTDI-JTAG, it can be slow. Now WICED supports native J-Link for Murata Type1GC (CYW43907 based module on that platform). So if you can use native J-Link instead of FTDI, it can be much faster.


            You can check this makefile for the configuration: 43xxx_Wi-Fi\tools\makefiles\wiced_toolchain_common.mk


            # User can assign specific JLINK_PATH & JLINK_EXE manually:

            # ex :

            # [Win32]

            # test.console-CYW943907AEVAL1F JTAG=jlink-native JLINK_PATH="../../../../Program\ Files\ \(x86\)/SEGGER/JLink_V630c/" JLINK_EXE="Jlink.exe" download run


            # [Linux]

            # test.console-CYW943907AEVAL1F JTAG=jlink-native JLINK_PATH="/opt/SEGGER/JLink/" JLINK_EXE="JLinkExe" download run

            1 of 1 people found this helpful