OVR pins in CY7C65634-28 pin

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
JaYe_3798301
Level 2
Level 2

Hi,

If the OVR function is not going to be used in CY7C65634, what should these pins be connected in the schematic?

Should they be connected to ground or simply leave them to be open and unconnected?

Jay

0 Likes
1 Solution
SrinathS_16
Moderator
Moderator
Moderator
1000 replies posted 750 replies posted 500 replies posted

Hello,

The OVR# pins are active LOW. So, it is recommended to pull these pins to a logic HIGH through a resistor if they are not used in the design.

Best regards,

Srinath S

View solution in original post

0 Likes
1 Reply
SrinathS_16
Moderator
Moderator
Moderator
1000 replies posted 750 replies posted 500 replies posted

Hello,

The OVR# pins are active LOW. So, it is recommended to pull these pins to a logic HIGH through a resistor if they are not used in the design.

Best regards,

Srinath S

0 Likes