- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I'm using the PSoc4 CY8C4024AZI on my own pcb, but I can't flash it with PE Micro Universal Multilink, SWD protocol.
The connections are okay and I'm energizing the uC and the flasher with an external source.
The PE Micro it's okay too, I tested it with another project.
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Please refer to the following links for more information on how to configure the programmer settings:
#1: PEmicro Cypress PSoC4 CY8C4024AZI-S403 Flash Programming, Debug, and Test
#2: PEMicro Blog
Please note that you won't be able to program using Multilink from PSoC Creator. Use PSoC Creator to create your project, then export to other IDEs like Keil, IAR etc. and then program.
Regards,
Dheeraj
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Please refer to the following links for more information on how to configure the programmer settings:
#1: PEmicro Cypress PSoC4 CY8C4024AZI-S403 Flash Programming, Debug, and Test
#2: PEMicro Blog
Please note that you won't be able to program using Multilink from PSoC Creator. Use PSoC Creator to create your project, then export to other IDEs like Keil, IAR etc. and then program.
Regards,
Dheeraj
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
I get this error when converting to uVision MDK 5:
".\UVBuild\UserInterface.sct(7): error: L6236E: No section matches selector - no section to be FIRST/LAST."
I tried this: Conversione from PSOC creator to Keil uVision
But in keil, I could not modify the scatter file.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
In PSoC Creator, go to Help > PSoC Creator Help Topics.
Here select the section "Integrating into 3rd party IDEs" as shown below to get the steps to export.
Regards,
Dheeraj
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Using the export to uVision4, I opened the project in uVision5 and configure step-by-step as the helper says. But I get this error on keil: --- Error: failed to execute 'arm-none-eabi-gcc'
I selected this folder:
C:\Program Files (x86)\Cypress\PSoC Creator\4.2\PSoC Creator\import\gnu\arm\5.4.1\bin
and arm-none-eabi-gcc is there.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
It looks like it found gcc, but it is not finding the headers of the project:
arm-none-eabi-gcc: error: ./uvbuild/capsense_control.o: No such file or directory
arm-none-eabi-gcc: error: ./uvbuild/capsense_filter.o: No such file or directory
arm-none-eabi-gcc: error: ./uvbuild/capsense_int.o: No such file or directory
arm-none-eabi-gcc: error: ./uvbuild/capsense_isr.o: No such file or directory
arm-none-eabi-gcc: error: ./uvbuild/capsense_processing.o: No such file or directory
arm-none-eabi-gcc: error: ./uvbuild/capsense_sensing.o: No such file or directory
arm-none-eabi-gcc: error: ./uvbuild/capsense_sensingcsd_ll.o: No such file or directory
arm-none-eabi-gcc: error: ./uvbuild/capsense_structure.o: No such file or directory
arm-none-eabi-gcc: error: ./uvbuild/capsense_tuner.o: No such file or directory
arm-none-eabi-gcc: error: ./uvbuild/clock_1.o: No such file or directory
arm-none-eabi-gcc: error: ./uvbuild/cm0plusstart.o: No such file or directory
arm-none-eabi-gcc: error: ./uvbuild/cybootasmgnu.o: No such file or directory
arm-none-eabi-gcc: error: ./uvbuild/cyflash.o: No such file or directory
arm-none-eabi-gcc: error: ./uvbuild/cylfclk.o: No such file or directory
arm-none-eabi-gcc: error: ./uvbuild/cylib.o: No such file or directory
arm-none-eabi-gcc: error: ./uvbuild/cypm.o: No such file or directory
arm-none-eabi-gcc: error: ./uvbuild/cy_em_eeprom.o: No such file or directory
arm-none-eabi-gcc: error: ./uvbuild/cyfitter_cfg.o: No such file or directory
arm-none-eabi-gcc: error: ./uvbuild/cymetadata.o: No such file or directory
arm-none-eabi-gcc: error: ./uvbuild/cyutils.o: No such file or directory
arm-none-eabi-gcc: error: ./uvbuild/main.o: No such file or directory
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Please follow the instructions given under the section "Keil uVision IDE notes" for GCC Settings as highlighted below:
Regards,
Dheeraj
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Generated_Source/PSoC4/CapSense_Configuration.h(42): error: fatal error: cytypes.h: No such file or directory
compiling CapSense_INT.c...
Generated_Source/PSoC4/CapSense_Configuration.h(42): error: fatal error: cytypes.h: No such file or directory
compiling CapSense_ISR.c...
Generated_Source/PSoC4/CapSense_ISR.c(19): error: fatal error: cydevice_trm.h: No such file or directory
compiling CapSense_Filter.c...
Generated_Source/PSoC4/CapSense_Structure.h(43): error: fatal error: cytypes.h: No such file or directory
compiling CapSense_Sensing.c...
Generated_Source/PSoC4/CapSense_Configuration.h(42): error: fatal error: cytypes.h: No such file or directory
compiling CapSense_SensingCSD_LL.c...
Generated_Source/PSoC4/CapSense_Structure.h(43): error: fatal error: cytypes.h: No such file or directory
compiling CapSense_Processing.c...
Generated_Source/PSoC4/CapSense_Configuration.h(42): error: fatal error: cytypes.h: No such file or directory
compiling CapSense_Structure.c...
Generated_Source/PSoC4/CapSense_Structure.c(40): error: fatal error: cytypes.h: No such file or directory
compiling CapSense_Tuner.c...
Generated_Source/PSoC4/CapSense_Structure.h(43): error: fatal error: cytypes.h: No such file or directory
compiling Clock_1.c...
Generated_Source/PSoC4/Clock_1.c(19): error: fatal error: cydevice_trm.h: No such file or directory
compiling Cm0plusStart.c...
Generated_Source/PSoC4/Cm0plusStart.c(21): error: fatal error: cyapicallbacks.h: No such file or directory
assembling CyBootAsmGnu.s...
Generated_Source/PSoC4/CyBootAsmGnu.s: Assembler messages:
Generated_Source/PSoC4/CyBootAsmGnu.s(18): error: can't open cyfittergnu.inc for reading: No such file or directory
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Resolved changing "<>" by " "" " in include files.
More two errors:
main.c(12): error: fatal error: project.h: No such file or directory
Generated_Source/PSoC4/CyBootAsmGnu.s(18): error: can't open cyfittergnu.inc for reading: No such file or directory
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Resolved adding .\Generated_Source\PSoC4\ in CC and Assembler tabs.
Next problems:
c:/program files (x86)/cypress/psoc creator/4.2/psoc creator/import/gnu/arm/5.4.1/bin/../lib/gcc/arm-none-eabi/5.4.1/../../../../arm-none-eabi/bin/ld.exe: address 0xa3b6 of ./UVBuild/AT007-01.elf section `.text' is not within region `rom'
c:/program files (x86)/cypress/psoc creator/4.2/psoc creator/import/gnu/arm/5.4.1/bin/../lib/gcc/arm-none-eabi/5.4.1/../../../../arm-none-eabi/bin/ld.exe: ./UVBuild/AT007-01.elf section `.eh_frame' will not fit in region `rom'
c:/program files (x86)/cypress/psoc creator/4.2/psoc creator/import/gnu/arm/5.4.1/bin/../lib/gcc/arm-none-eabi/5.4.1/../../../../arm-none-eabi/bin/ld.exe: address 0xa3b6 of ./UVBuild/AT007-01.elf section `.text' is not within region `rom'
c:/program files (x86)/cypress/psoc creator/4.2/psoc creator/import/gnu/arm/5.4.1/bin/../lib/gcc/arm-none-eabi/5.4.1/../../../../arm-none-eabi/bin/ld.exe: address 0xa3b6 of ./UVBuild/AT007-01.elf section `.text' is not within region `rom'
c:/program files (x86)/cypress/psoc creator/4.2/psoc creator/import/gnu/arm/5.4.1/bin/../lib/gcc/arm-none-eabi/5.4.1/../../../../arm-none-eabi/bin/ld.exe: region `rom' overflowed by 26408 bytes
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Have you added the custom linker script file ".\Generated_Source\PSoC4\cm0plusgcc.ld" in the linker tab?
Regards,
Dheeraj