Yes. This is expected. P0.4 of CY8C4014 is dedicated pin for Cmod. For some other PSoC4 devices, even though you can choose other pin instead of dedicated pin for Cmod, that dedicated pin may not be used for other functions.
Just curious how that squares with the information in http://www.cypress.com/file/46081/download ...? Notably Tables 7-7 and 7-8.
From what I'm seeing (with actual boards on my desk), P0.4 sits at 1.2 V - which is what I'd expect if it were functioning as Cmod. And PSoC creator __allows__ me to specify P0.1 in the Pin Editor...but when I look in the Analog Editor I see that P0.4 is drawn as the source for the Cmod node on the CSD0 element, and the SPICE tool reports a 0 ohm impedance between P0.4 and the Cmod node...
Thanks and best regards,
1 of 1 people found this helpful
For PSoC4000/4100/4200 seires (no S), even though you can choose another pin instead of the dedicated pin, the dedicated pin will be occupied. For example P0.4 of PSoC4000, P4.2 of PSoC4200.