confirm polarity of FV

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

The VSYNC of CMOS produce high pulse means a new frame is coming.Then when VSYNC is low and HSYNC is high,the data will be transmit.

But in the GPIF Designer, if the polarity of FV is high ,when FV is low,it means end of frame.

Should I set the polarity of FV active low in my designer?

0 Likes
5 Replies
Keerthy_V
Moderator
Moderator
Moderator
First like given 250 sign-ins 50 solutions authored

Hello ,

You can customize your GPIF II state machine.

As per your comments, the start of the frame is detected by the pulse in the VSYNC line. However, the VSYNC will go low within a short duration of time and will not stay high during the active portion of the frame.

Can you please let me know how can we identify the blanking period of the frame in your case?

0 Likes
Anonymous
Not applicable

sorry,i amn't familiar with the CMOS ,its signal like this:1.JPG

i think  when the VSYNC is high is the blanking period

0 Likes
Keerthy_V
Moderator
Moderator
Moderator
First like given 250 sign-ins 50 solutions authored

Can you please share sensor datasheet?

What is value of VS_H? Is it configurable?

0 Likes
Anonymous
Not applicable

the sensor is ov5642

0 Likes

Hello Mini Nano,

--Please let me know, What is the time between VSYNC going high and HSYNC going high?

-We didn't find VS_H value in the data sheet.measure the VS_H value and share it.

Regards,

Anil Srinivas.

0 Likes