- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Starting MAKE...
creating project.mk
make: *** No rule to make target `C:\Users\Doug\DOCUME~1\cypress\cy8c20247s', needed by `lib/obj/buzzer.o'. Stop.
Proximity_with_CY8C20xx7v4_smartsense_HW_TEST - 1 error(s) 0 warning(s) 08:53:03
What this is supposed to tell me?
I am using PSOC designer 5.4 SP1
and cy8c20247s
I have attached an archive of the project.
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Problem solved. The error messages I got were because the linker could not find the object files.
make: *** No rule to make target `C:\Users\Doug\DOCUME~1\cypress\cy8c20247s', needed by `lib/obj/buzzer.o
I added a path to the lib in the build settings and this problem went away and I found a whole new set of problems arose.
I don't know why but the archive contained all of the correct libs. I just used the archive that I made (see above) to create a new workspace and all the issues went away.
Thanks for looking at this.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
idata dump at output/Proximity_with_CY8C20xx7v4_smartsense_HW_TEST.idata
ROM 42% full. 6820 out of 16384 bytes used (does not include absolute areas).
RAM 9% full. 148 bytes used (does not include stack usage).
Built with ICCM8C STD V7.05.00
Proximity_with_CY8C20xx7v4_smartsense_HW_TEST - 0 error(s) 0 warning(s) 08:00:40
Your project pass building on my laptop with no error. So how to reproduce your issue?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I reinstalled psoc designer, I have tried it on 2 computers windows 10. I
stripped out most of the code. Removed the offending module and the next
module is in error. What am I doing wrong.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks for trying my project. I don't know why but all the libraries were available in that archive but not in my workspace. I unarchived it and everything is good.
Thanks for the help
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Problem solved. The error messages I got were because the linker could not find the object files.
make: *** No rule to make target `C:\Users\Doug\DOCUME~1\cypress\cy8c20247s', needed by `lib/obj/buzzer.o
I added a path to the lib in the build settings and this problem went away and I found a whole new set of problems arose.
I don't know why but the archive contained all of the correct libs. I just used the archive that I made (see above) to create a new workspace and all the issues went away.
Thanks for looking at this.