FX2LP SLWR

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
gean_3054931
Level 5
Level 5
10 likes given 5 likes given First like received

Hello,

fx2lp is interfaced with image sensor in slavefifo  .is there any firmware control with the slavefifo interface signals.

i wanted to stop and start the slwr assertion and deassertion

or

i wanted to stop and start data written to the endpoint buffer from the sensor?

is ther any register settings or any logic can implement?

regards,

geetha.

0 Likes
1 Solution
SrinathS_16
Moderator
Moderator
Moderator
1000 replies posted 750 replies posted 500 replies posted

Hello Geetha,

Since you have mentioned that you are using FX2LP in slave FIFO mode, it acts as the slave and the image sensor acts as the master. So, the FX2LP cannot control the SLWR pin signals from the firmware. They are to be controlled from the external master.

Best regards,

Srinath S

View solution in original post

0 Likes
1 Reply
SrinathS_16
Moderator
Moderator
Moderator
1000 replies posted 750 replies posted 500 replies posted

Hello Geetha,

Since you have mentioned that you are using FX2LP in slave FIFO mode, it acts as the slave and the image sensor acts as the master. So, the FX2LP cannot control the SLWR pin signals from the firmware. They are to be controlled from the external master.

Best regards,

Srinath S

0 Likes