PSoC6 integrated with EmWin library - Graphics option not present in Build Settings

[vigb_1229181]

Hi,

I have downloaded an PSoC6-EmWin integrated project from

http://www.cypress.com/documentation/code-examples/ce223726-psoc-6-tft-display-interface-emwin-graph...

As per the attached document, we have to make certain selections in PDL Graphics configuration in Build Settings of the project.

But in the downloaded project, there is no option of Graphics in PDL of Build Settings. This is leading to compilation error. How to link this project with emwin graphics library.

regards,

Vinay

[ShipingW_81 · Accepted solution]

Firstly ,You need install latest version PDL(v3.0.4​),

and then map it to P6 project in PSoC Creator -> Tools -> Options -> PDL v3 Location.

After above done, check again if the options of Graphics Package in Build Settings are checked, shown as below: