Recover

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
user_3572401
Level 3
Level 3
First like received

I am using CYBT-343026-EVAL with WICED 6.2 now.

I know recovery todo 1~5 like below.

1. Press and hold RECOVER button (SW2) |

2. Press and hold RESET button (SW1) for 1 second |

3. Release SW1 |

4. Release SW2 |

5. Re-program the board

I am wonder whether below items are deleted after recover.

1.The software that downloaded to CYBT-343026-EVAL.

2.The bd_address of paried device.shjlgoto-t_2353976user_140663973user_437857088axel.lin_1746341

0 Likes
1 Solution

Hi y-zhang_3572401

Apologies for the confusion.! In clear words, nothing will get deleted after recovery. Program and bonding information (BD address) will be there until you reprogram it.

View solution in original post

0 Likes
10 Replies
SheetalJ
Moderator
Moderator
Moderator
First comment on KBA 750 replies posted 500 likes received

Hi y-zhang_3572401

After recovery of the board,

1. the app downloaded to your board will be deleted

2. BD address of the paired device will also be deleted.

0 Likes

Hi,shjl

I downloaded Audio Gateway software to  the board,and recovered the board.

After that,I press the reset button of the board.

I can also see the trace log that I maked before which the software is I downloaded to the board.

0 Likes

Hi y-zhang_3572401

To be clear, when you recover the board, the board will enter the auto-baud mode, which means the device will think that the flash is corrupted. Whether as when you reset the device after recovery, the device will come out of auto-baud mode, whatever is there in flash will be read and therefore you see the logs of the previous software because you have not overwritten it by programming again.

So exact answer of your question can be, the program does not get deleted but recovery gives you the permission to overwrite it with your new program.

0 Likes

Thank you for your answer.

>the program does not get deleted

Recover does not delete the software that downloaded to CYBT-343026-EVAL

>BD address of the paired device will also be deleted.

Please let check it again,Is it correct?

0 Likes

Yes this is correct.!

0 Likes

Could you tell me that Which memory is deleted after recover ?

Serial Flash memor,or RAM memory,ROM memory?

0 Likes

When you program the board, application will be loaded into flash, then gets copied to RAM and from there it executes.

After you do recovery and press reset, the code will again execute from the RAM. So ideally, nothing gets deleted.

Rom is untouched here.

Regards,

Sheetal

0 Likes

Sorry,I am confused.

>>BD address of the paired device will also be deleted.

>Yes this is correct.!

and the new answer is >nothing gets deleted.

Will BD adrress remain or not after recover.

0 Likes

Could you give a clear answer about this?shjlaxel.lin_1746341goto-t_2353976user_437857088user_140663973

0 Likes

Hi y-zhang_3572401

Apologies for the confusion.! In clear words, nothing will get deleted after recovery. Program and bonding information (BD address) will be there until you reprogram it.

0 Likes