When FW on CCG3 toggle?

Announcements

Live Webinar: USB-C adoption. Simple & Cost-efficient solutions | April 18th @9am or 5pm CEST. Register now !

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

Hello,

I am checking which FW1 and FW2 each is working on CCG3 with Configuration Utility.

I heard if CCG3 is reset or powered on after power off, FW is toggled.

However, on Configuration Utility, my FW is not changed no more even if I reset and power on.

So let me know when the FW is toggled, and let me know the condition of the toggle.

Best regards,

0 Likes
1 Solution
HirotakaT_91
Moderator
Moderator
Moderator
500 replies posted 250 replies posted 100 replies posted

Hello,

> CCG3 is reset or powered on after power off, FW is toggled.

Unfortunately, It is not true.

To put it simply, latest programmed firmware will be load.

FW1 is programmed while running FW2, FW1 will run after reset or power off&on.

FW2 is programmed while running FW1, FW2 will run after reset or power off&on.

Both FW1 and FW2 are programmed, FW2 will run after reset or power off&on.

You can confirm the running Firmware by "Running mode" on "Read from Device" or "Firmware Update" of EZ-PD Configuration Utility.

In case of following picture, FW2 is running.

pastedImage_0.png

Best regards,

Hirotaka Takayama

View solution in original post

0 Likes
1 Reply
HirotakaT_91
Moderator
Moderator
Moderator
500 replies posted 250 replies posted 100 replies posted

Hello,

> CCG3 is reset or powered on after power off, FW is toggled.

Unfortunately, It is not true.

To put it simply, latest programmed firmware will be load.

FW1 is programmed while running FW2, FW1 will run after reset or power off&on.

FW2 is programmed while running FW1, FW2 will run after reset or power off&on.

Both FW1 and FW2 are programmed, FW2 will run after reset or power off&on.

You can confirm the running Firmware by "Running mode" on "Read from Device" or "Firmware Update" of EZ-PD Configuration Utility.

In case of following picture, FW2 is running.

pastedImage_0.png

Best regards,

Hirotaka Takayama

0 Likes