- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
I'm user of 'CYW20706'.
I will use the Bluetooth Module of CYBT-343026-01.
I read blog 'Configuring the Bluetooth device address in CYW20706'.
https://community.cypress.com/community/wiced-studio-blueooth/wiced-studio-bluetooth-forums/blog/201...
'Company' is written in this document .
Which is 'Company', Cypress or user?
If user is answer, Do I have to write the DB_address in our production?
Best & Regards,
y_naka
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The company is customer's company id. You need to apply for your own BT address in the IEEE.
If you are using the EZ-Serial for yout development. Cypress can program the BD_Address for you. If you are developing your own firmware, you need to program it by yourself.
Please ask the local FAE or create a technical support case for the details about the program for your production.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The company is customer's company id. You need to apply for your own BT address in the IEEE.
If you are using the EZ-Serial for yout development. Cypress can program the BD_Address for you. If you are developing your own firmware, you need to program it by yourself.
Please ask the local FAE or create a technical support case for the details about the program for your production.