WHO WRITE DB_ADDRESS

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
NAYU_1212731
Level 1
Level 1
First like given

Hello,

I'm user of 'CYW20706'.
I will use the Bluetooth Module of CYBT-343026-01.
I read  blog 'Configuring the Bluetooth device address in CYW20706'.
https://community.cypress.com/community/wiced-studio-blueooth/wiced-studio-bluetooth-forums/blog/201...

'Company' is written in this document .
Which is 'Company', Cypress or user?

If user is answer, Do I have to write the DB_address in our production?

Best & Regards,

y_naka

0 Likes
1 Solution
Owen_Zhang123
Moderator
Moderator
Moderator
5 questions asked 500 solutions authored 250 sign-ins

The company is customer's company id. You need to apply for your own BT address in the IEEE.

If you are using the EZ-Serial for yout development. Cypress can program the BD_Address for you. If you are developing your own firmware, you need to program it by yourself.

Please ask the local FAE or create a technical support case for the details about the program for your production.

View solution in original post

1 Reply
Owen_Zhang123
Moderator
Moderator
Moderator
5 questions asked 500 solutions authored 250 sign-ins

The company is customer's company id. You need to apply for your own BT address in the IEEE.

If you are using the EZ-Serial for yout development. Cypress can program the BD_Address for you. If you are developing your own firmware, you need to program it by yourself.

Please ask the local FAE or create a technical support case for the details about the program for your production.