- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
You're certainly welcome...
FYI : The Power Dissipation (Pd) should be 60 mW, and not 60 mA...Sorry for the typo error.
Best regards,
Albert
Cypress Semiconductor
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
You can find the thermal parameters for the device S29AL016J55TFIR20 in the qualification report: http://www.cypress.com/file/360896/download. Please note, we do not provide Theta JC and Theta JB parameters for our flash devices, Theta JA and Psi JT parameters are available in this document. You can refer our application note for more details about thermal parameters, http://www.cypress.com/file/210756/download .
Please feel free to ask if you need any clarifications.
Thanks and Regards,
Sudheesh
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
POWER DISSIPATION FOR NOR FLASH S29AL016J55TFIR20
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
The typical Power Dissipation (Pd) in regards to the S29AL016J can be calculated by referring
the S29AL016J datasheet, page 38, Section 14 - DC Characteristics :
Active Erase/Program Current = 20 mA (typ.)
Active Erase/Program Voltage = 3.0 (typ.)
Pd = V x I
60 mA = 3.0 x 20 mA
Hope this helps...
Best regards,
Albert
Cypress Semiconductor
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thank you
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
You're certainly welcome...
FYI : The Power Dissipation (Pd) should be 60 mW, and not 60 mA...Sorry for the typo error.
Best regards,
Albert
Cypress Semiconductor