-
1. Re: FX3S Mass Storage Device USB 3.0 Drivers
SrinathS_16Aug 19, 2018 10:50 AM (in response to ceay_1559836)
Hello Cengiz,
Mass Storage is a standard USB class and hence the device can be used with drivers that are native to the OS. No separate installation of drivers is required.
Best regards,
Srinath S
-
2. Re: FX3S Mass Storage Device USB 3.0 Drivers
ceay_1559836 Aug 23, 2018 4:45 AM (in response to SrinathS_16)Thank you Srinath.
Ok but what avoids than Cypress reference FX3SRaid0 project can not enumerate as
a USB 3.0 device in our board? We know other USB sticks work as USB 3.0 devices
in the same PC.
Regards,
Cengiz
-
3. Re: FX3S Mass Storage Device USB 3.0 Drivers
SrinathS_16Aug 27, 2018 4:19 AM (in response to ceay_1559836)
Hello Cengiz,
Using the FX3SRadi0 firmware on our kit, I am able to enumerate the device successfully. Can you please let me know what error do you face on enumeration? Kindly, share the USB traces if possible.
Best regards,
Srinath S
-
4. Re: FX3S Mass Storage Device USB 3.0 Drivers
ceay_1559836 Aug 27, 2018 5:25 AM (in response to SrinathS_16)Hi Srinath,
Our board enumerates as a USB 2.0 device successfully but although is
supports USB 3.0,
it does not enumerate as USB 3.0.
I use the same PC with other USB 3.0 compatible mass storage devices
without a problem.
PC ports support USB 3.0 and USB 3.0 drivers are working on it too.
I attach USBTreeView output file. Can you please take your board output
with USBTreeView
and compare with ours?
https://www.uwe-sieber.de/usbtreeview_e.html#download
Thank you.
Cengiz
-
5. Re: FX3S Mass Storage Device USB 3.0 Drivers
SrinathS_16Aug 27, 2018 10:43 PM (in response to ceay_1559836)
Hello Cengiz,
- I have attached the USBTreeView information. The SDK firmware enumerates the device in USB3.0 mode.
- Can you please share the USB traces during the device enumeration?
Best regards,
Srinath S