- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
- Please let know if your application is based on Cypress provided example firmware.
- In case you have built your application using the SlaveFifoSync example as the reference, follow the instructions below to bind the device to CYUSB3 driver.
1. Right click on the device and choose "Update Driver Software"
2. Choose "Browse my computer for driver software"
3. Choose "Let me pick from alist of device drivers on my computer"
4. Click on "Have Disk"
5. Navigate to C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\driver\bin\<OS_Version>\<OS_Architecture> and point to the CYUSB3.INF file
6. From the list of devices displayed, choose Cypress FX3 USB Streamer Example and click on OK.
Best regards,
Srinath S
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
- Please let know if your application is based on Cypress provided example firmware.
- In case you have built your application using the SlaveFifoSync example as the reference, follow the instructions below to bind the device to CYUSB3 driver.
1. Right click on the device and choose "Update Driver Software"
2. Choose "Browse my computer for driver software"
3. Choose "Let me pick from alist of device drivers on my computer"
4. Click on "Have Disk"
5. Navigate to C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\driver\bin\<OS_Version>\<OS_Architecture> and point to the CYUSB3.INF file
6. From the list of devices displayed, choose Cypress FX3 USB Streamer Example and click on OK.
Best regards,
Srinath S