My ram is way too high (overflow by 140,000 bytes) when I try to use the PSoC 6 MCU with Bluetooth Low Energy (BLE) Connectivity Bootloader example to bootload my own custom application

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

My custom application doesn't overflow when I run it on its own. However, when I try to incorporate the ble bootloading example into it so I can update my program via the ble bootloader, it keeps overflowing by an excessive amount of ram. Can anyone help me? Thanks!

0 Likes
1 Solution
ShipingW_81
Moderator
Moderator
Moderator
500 replies posted 250 solutions authored 250 replies posted

@fple@ucdavis.edu

Are you modifying a general project to be a bootloadable project (app1 for PSoC 6)?

If yes, please refer to the steps shown in AN213924 chapter 4.3: http://www.cypress.com/file/385706/download

If you still have any issue with referring to the steps, pls let me know at which step the issue occurs.

View solution in original post

0 Likes
2 Replies
ShipingW_81
Moderator
Moderator
Moderator
500 replies posted 250 solutions authored 250 replies posted

@fple@ucdavis.edu

Are you modifying a general project to be a bootloadable project (app1 for PSoC 6)?

If yes, please refer to the steps shown in AN213924 chapter 4.3: http://www.cypress.com/file/385706/download

If you still have any issue with referring to the steps, pls let me know at which step the issue occurs.

0 Likes