PSoc 4 Fcc Testing Firmware

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

Hi,

Can I get a simple firmware (without UART or button) for testing FCC for allowing the following changes to BLE? We are using CY8C4248LQI-BL583 with customized PCB.

  • Frequency channels (low/mid/high)
  • Highest Modulation

Thanks

0 Likes
1 Solution
lock attach
Attachments are accessible only for community members.
Anonymous
Not applicable

Please find attached a project and an hex file.

Upon power-up, the firmware makes the PSoC 4 BLE transmit DTM packets at 2440 MHz at maximum power with PRBS9 payload. Hope this helps.

View solution in original post

0 Likes
1 Reply
lock attach
Attachments are accessible only for community members.
Anonymous
Not applicable

Please find attached a project and an hex file.

Upon power-up, the firmware makes the PSoC 4 BLE transmit DTM packets at 2440 MHz at maximum power with PRBS9 payload. Hope this helps.

0 Likes