Australia regulation of CYBT-343026

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
TaGo_2353976
Level 4
Level 4
5 likes given First like received First like given

Hi,

My customer has a plan to use this module in Australia.

However ,this module seems not to pass RCM(AU / NZ regulation) according to following link.

RF Regulatory Certifications for CYBT-343026-01, CYBT-343029-01, and CYBT-143038-01 EZ-BT™ Modules –...

If the customer would like to pass regulation of the region which Cypress still not pass , not only AU but also others,

does Cypress pass it instead of the customer in customer expense ?

Or, should the customer pass it by themselves.

In this case, the customer needs module design file, such as schematic , gerber file and BOM of the module.

Thank you.

--TAK

0 Likes
1 Solution
lock attach
Attachments are accessible only for community members.

Hi,

PFA

Attached is the updated relevant certification reports to state the Australian standards.  Customer should be able to use these for Australian declaration now. 

We will update the KBA online to reflect the latest reports and certificates.

Thanks & Regards,

Anjana

View solution in original post

7 Replies
AnjanaM_61
Moderator
Moderator
Moderator
5 comments on KBA First comment on KBA 5 questions asked

Hi,

The customer may have to contact a Third part RF Certification agency for the same.

We have the 3D model files available for the module here: 3D Model Files for EZ-BLE/EZ-BT Modules – KBA218122

Regards,

Anjana

Hi,

Does Cypress pass it instead of the customer in customer expense ?

Usually, our module suppliers can pass it instead of the customer in customer expense.

And also, regarding to AU, local office in AU/NZ is needed in order to pass RCM so

passing RCM by module itself is ideal.

That's why I'm asking.

Thank you.

--Takuya

0 Likes

As previously noted, the customer will need to contact a Third part RF Certification agency for this certification.

0 Likes

For double check,

Q1: Cypress does not have a plan to pass it by module itself instead of the customer ?

Q2: If so, Cypress will provide not only 3D model file but also all documents that RF certification company needs with Cypress technical support?

[Back Ground]

According to RF certification company(UL),

they often request module suppliers to provide following documents.

-Module Schematic

-Module layout file(Gerber)

-Module BOM file

-Antenna specification,such as pattern and gain.

-User Manual of DUT(module)

-Parameter sheet

Thank you.

--Takuya

0 Likes

Adding a few members of the Applications team: grsr riya rroy zhez zhxh yans kavs shjl

0 Likes

Hi

We got the rushing from our customer.

Could you follow as soon as possible?

For just in case, I summarize our situation.

Q1: Does Cypress never plan to get regulation by the customer expense ?

Q2: If no, does Cypress allow to provide all of documents that 3rd party regulation company request, such as schematic , layout file and BOM file ?(Please see previous note to know the detail about which kinds of document 3rd party requests)

Sorry for rushing you.

--Takuya

0 Likes
lock attach
Attachments are accessible only for community members.

Hi,

PFA

Attached is the updated relevant certification reports to state the Australian standards.  Customer should be able to use these for Australian declaration now. 

We will update the KBA online to reflect the latest reports and certificates.

Thanks & Regards,

Anjana