CYUSB3304 VBUS power

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
aldoc_3474881
Level 1
Level 1

Hello.

I see that the sample schematic for CYUSB3304  has a circuit for over-voltage protection. So, when the VBUS gets above around 5.8V, then the VBUS_US pin gets disabled. Does the chip kill the power by the PWR_EN pin to the power switch chip (U5) after VBUS_US goes low?

Alin

0 Likes
1 Solution
Anonymous
Not applicable

Hi Alin,

When the VBUS from Host on Upstream exceeds the recommended voltage range, Over Voltage Protection IC disables VBUS_US.

And YES, the VBUS on the downstream ports will be disabled by PWR_EN through power switch, if Ghost Charging is disabled.

Else if Ghost Charging is enabled, the VBUS on the downstream ports will be 5V.

Regards,

Anil  

View solution in original post

0 Likes
1 Reply
Anonymous
Not applicable

Hi Alin,

When the VBUS from Host on Upstream exceeds the recommended voltage range, Over Voltage Protection IC disables VBUS_US.

And YES, the VBUS on the downstream ports will be disabled by PWR_EN through power switch, if Ghost Charging is disabled.

Else if Ghost Charging is enabled, the VBUS on the downstream ports will be 5V.

Regards,

Anil  

0 Likes