- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
I have one application which will write and read data from slavefifo. It is working fine and we dont see any issue. If we press ctrl + c it is exiting and if we try to connect execute the command (exe) it is not detecting the cypress device. I check with control center also and we see nothing connected to the pc. If we reconnect the USB and checked again. this time we can cypress device getting detected. Could you please let me know on how to solve this issue?
Thanks,
Aswin kavali
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi
You can comment out "CyFxSlFifoApplnDebugInit()" in the firmware to resolve this issue.
-Regards
Abhinav
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Aswin Kavali,
- Please let know the firmware that you are using. Is it an example firmware or your custom firmware?
- Also, kindly, check the device manager for the presence of the device.
Best regards,
Srinath S
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I am using USB streamer firmware. (slavesync)
We can do a cypress reset from another device. we don't have any issue with that. I would like to know whether we can solve this issue from the application itself
Thanks,
Aswin kavali
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Aswin,
You have to implement a callback function which will be called while closing the application using ctrl + C. Please refer to the standard implementation of closing function in the streamer application in the following path.
Please mention on which OS you are running your application?
Cpp: C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\application\cpp\streamer\streamer.cpp
CSharp: C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\application\c_sharp\streamer
Thanks & regards
Abhinav
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Aswin,
I tried to send files with "Bulksrcsink" example firmware and found that it is working fine. I pressed "Ctrl + C" in between the file transfer but still application detect FX3 for the second time. Could you please share the exact firmware that you are using?
Thanks & regards
Abhinav
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi
You can comment out "CyFxSlFifoApplnDebugInit()" in the firmware to resolve this issue.
-Regards
Abhinav