1 2 3 Previous Next 35 Replies Latest reply on Jul 3, 2018 3:41 AM by VlKh_2251656 Go to original post
      • 30. Re: How add resolution ov5640 CX3 using gpif II
        VlKh_2251656

        Many thanks!

        Please, see attach

         

        any tabs?

        • 31. Re: How add resolution ov5640 CX3 using gpif II
          VlKh_2251656

          Sorry, any errors (in attach)

          Maybe something else needs to be change?

          • 32. Re: How add resolution ov5640 CX3 using gpif II
            KandlaguntaR_36

            Please build the project and check whether there is any errors in the Console.

            Click on the CX3 Receiver Configuration Tab to see other tabs.

            • 33. Re: How add resolution ov5640 CX3 using gpif II
              VlKh_2251656

              Console out:

               

               

              12:59:31 **** Build of configuration Release for project UVC_CDC_2 ****

              cs-make all

              'Building file: ../cycx3_uvc.c'

              'Invoking: Cross ARM C Compiler'

              arm-none-eabi-gcc -mcpu=arm926ej-s -marm -mthumb-interwork -O3 -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -Wall  -g -D__CYU3P_TX__=1 -I"C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\/fw_lib/1_3_3/inc" -std=gnu11 -MMD -MP -MF"cycx3_uvc.d" -MT"cycx3_uvc.o" -c -o "cycx3_uvc.o" "../cycx3_uvc.c"

              'Finished building: ../cycx3_uvc.c'

              ' '

              'Building file: ../cycx3_uvcdscr.c'

              'Invoking: Cross ARM C Compiler'

              arm-none-eabi-gcc -mcpu=arm926ej-s -marm -mthumb-interwork -O3 -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -Wall  -g -D__CYU3P_TX__=1 -I"C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\/fw_lib/1_3_3/inc" -std=gnu11 -MMD -MP -MF"cycx3_uvcdscr.d" -MT"cycx3_uvcdscr.o" -c -o "cycx3_uvcdscr.o" "../cycx3_uvcdscr.c"

              'Finished building: ../cycx3_uvcdscr.c'

              ' '

              'Building file: ../cyfx_gcc_startup.S'

              'Invoking: Cross ARM GNU Assembler'

              arm-none-eabi-gcc -mcpu=arm926ej-s -marm -mthumb-interwork -O3 -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -Wall  -g -x assembler-with-cpp -I"C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\/fw_lib/1_3_3/inc" -MMD -MP -MF"cyfx_gcc_startup.d" -MT"cyfx_gcc_startup.o" -c -o "cyfx_gcc_startup.o" "../cyfx_gcc_startup.S"

              'Finished building: ../cyfx_gcc_startup.S'

              ' '

              'Building file: ../cyfxtx.c'

              'Invoking: Cross ARM C Compiler'

              arm-none-eabi-gcc -mcpu=arm926ej-s -marm -mthumb-interwork -O3 -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -Wall  -g -D__CYU3P_TX__=1 -I"C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\/fw_lib/1_3_3/inc" -std=gnu11 -MMD -MP -MF"cyfxtx.d" -MT"cyfxtx.o" -c -o "cyfxtx.o" "../cyfxtx.c"

              'Finished building: ../cyfxtx.c'

              ' '

              'Building target: UVC_CDC_2.elf'

              'Invoking: Cross ARM C Linker'

              arm-none-eabi-gcc -mcpu=arm926ej-s -marm -mthumb-interwork -O3 -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -Wall  -g -T "C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\/fw_build/fx3_fw/fx3.ld" -nostartfiles -Xlinker --gc-sections -L"C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\/fw_lib/1_3_3/fx3_release" -L"C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\ARM GCC\/lib/gcc/arm-none-eabi/4.8.1" -L"C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\ARM GCC\/arm-none-eabi/lib" -Wl,-Map,"UVC_CDC_2.map" -Wl,-d -Wl,--no-wchar-size-warning -Wl,--entry,CyU3PFirmwareEntry -o "UVC_CDC_2.elf"  ./cycx3_uvc.o ./cycx3_uvcdscr.o ./cyfx_gcc_startup.o ./cyfxtx.o   -lcy_ov5640 -lcyu3mipicsi -lcyu3lpp -lcyfxapi -lcyu3threadx -lc -lgcc

              'Finished building target: UVC_CDC_2.elf'

              ' '

              cs-make --no-print-directory post-build

              'Generate boot-loadable binary image'

              'C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\/util/elf2img/elf2img.exe' -i UVC_CDC_2.elf -o UVC_CDC_2.img -v

              Note: 256 bytes of interrupt vector code have been removed from the image.

              Endian-ness    : Little

                    Use the "-vectorload yes" option to retain this code.

              Entry point    : 0x4000ca44

               

               

              Program header table offset: 0x00000034

              Program header count       : 3

              Program header entry size  : 0x0020

              Copying data from program header:

              Addr=0x00000100 Size(words)=0x0000088a FileSize=0x0000088a Offset=0x00000100 Flags=0x00000005

              Copying data from program header:

              Addr=0x40003000 Size(words)=0x00004000 FileSize=0x00004000 Offset=0x00003000 Flags=0x00000005

              Copying data from program header:

              Addr=0x40013000 Size(words)=0x0000232c FileSize=0x0000232c Offset=0x00013000 Flags=0x00000005

              Copying data from program header:

              Addr=0x40030000 Size(words)=0x00000e94 FileSize=0x000007e2 Offset=0x00020000 Flags=0x00000006

              ' '

              'Invoking: Cross ARM GNU Print Size'

              arm-none-eabi-size --format=berkeley "UVC_CDC_2.elf"

                 text    data     bss     dec     hex filename

              110296    8072    6832 125200   1e910 UVC_CDC_2.elf

              'Finished building: UVC_CDC_2.siz'

              ' '

               

               

              12:59:33 Build Finished (took 1s.758ms)

               

               

               

              Good? Strange...

              • 34. Re: How add resolution ov5640 CX3 using gpif II
                KandlaguntaR_36

                This is good and expected.

                1 of 1 people found this helpful
                1 2 3 Previous Next