- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I'm trying to use the example AN82072 to send and receive some data from a psoc5 over USB. I loaded up the example workspace and programmed it onto my development kit. That seemed to work fine on my CY8CKIT-050.
I used the Windows host application included with the AN, and it seems to be connecting and getting the ADC and switch status just fine. The problem I'm seeing is with sending data from the application to the psoc. If I change the duty cycle and hit the update button, nothing happens. If I spam click the button a whole bunch of times, eventually the new value makes it through, and is reflected on the LCD. I had a colleague try it on his machine with the same result.
Seems like it might be a problem with cyusb.dll - it's ultimately using the CyHidDevice.WriteOutput() method. Maybe there's some sort of usage issue with the library, but that seems odd, given that I'm just trying to use the example as-is. I tried the Linux host example, and it worked reliably.
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Try reinstalling and running the project. I have checked for its working and it seems to work fine. If not there must be some issue with the USB on your board. Could you check if you can run USBUART code examples (http://www.cypress.com/documentation/code-examples/ce95396-usb-uart-psoc-35lp) and check for its working?
Regards,
Dheeraj
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Try reinstalling and running the project. I have checked for its working and it seems to work fine. If not there must be some issue with the USB on your board. Could you check if you can run USBUART code examples (http://www.cypress.com/documentation/code-examples/ce95396-usb-uart-psoc-35lp) and check for its working?
Regards,
Dheeraj