CX3: CLKIN rise/fall time

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
beGr_3211946
Level 1
Level 1

Hi,

We are designing our schematic. We already use a 19.2MHz oscillator in other design, but this one has 10ns/6ns rise and fall time.

In CX3 datasheet, specification given on CLKIN/REFCLK for rise and fall time is 3ns.

Can we use our oscillator ? Shall we seek another one ? Does someone have a reference or partnumber for a compatible oscillator ?

Thank you !

Benjamin.

0 Likes
1 Solution
Keerthy_V
Moderator
Moderator
Moderator
First like given 250 sign-ins 50 solutions authored

We have tested the part ASEMB-19.200MHZ-LY-T with CX3 and it works fine. The datasheet of the oscillator can be found at http://www.abracon.com/Oscillators/ASEMB.pdf

View solution in original post

0 Likes
1 Reply
Keerthy_V
Moderator
Moderator
Moderator
First like given 250 sign-ins 50 solutions authored

We have tested the part ASEMB-19.200MHZ-LY-T with CX3 and it works fine. The datasheet of the oscillator can be found at http://www.abracon.com/Oscillators/ASEMB.pdf

0 Likes