How to program PSoC3 CY8C3866LTI-068 with the Command-line Tool?

[Anonymous]

Dear Community,

My customer is trying to program the IC through Command-line Tool.

With the GUI it functions perfect and could be programmed.

Hardware used is MiniProg3.

The main question is: how to programm hex-data, how to transfer them to IC, using command line?

Attached please find Log data in PSoC3_EraseAll.

Kind regards,

Danko

[RyanZhao]

Hi Danko,

Can refer to the example code in the local install folder of PSoC Programmer.

Maybe the direction is or similar with:

C:\Program Files (x86)\Cypress\Programmer\Examples\Programming\PSoC3_5

Thanks,

Ryan

[Anonymous]

Hi Ryan,

Thanks for the quick answer, this however does not solve the Problem (customer knows these examples).

Let me formulate the question the othe way around:

The customer wants a Batchjob via Command Level.

Through the Command Level is possible to erase all in a uC (EraseAll command).

But the question is how can the customer Programm a Hex-File via Command-line?

I hope it puts another light to the question.

Kind regards,

Danko