- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
We are using usb sound sensor with our product. Sensor is usb device. we want USB host controller to intact with it. pls suggest usb host controller.
Sensor Details:
FTDIBUS\COMPORT & VID_19CE&PID_9073
Device name: SINUS SLM Tango (907.3) MANUFATURE SINUS Messtechnik GmbH
Serial Settings of the device: Baud rate: 115200 Baud Data bits: 8 Bit Stop bits: 1 Bit Parity: None
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Some of our host solutions are here:
http://www.cypress.com/products/other-usb-controllers
All these support upto full speed USB so, it should be OK for a 115200 baud device.
Please go through the datasheets to see if they are OK for your application.
Regards,
- Madhu Sudhan
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Some of our host solutions are here:
http://www.cypress.com/products/other-usb-controllers
All these support upto full speed USB so, it should be OK for a 115200 baud device.
Please go through the datasheets to see if they are OK for your application.
Regards,
- Madhu Sudhan