- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
i have created dmachannel as p port is producer and s port as consumer,in this case ,CyU3PSibReadWriteRequest() api is require to write data to sdcard from p port?
let me know,thank you.
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Geethanjali,
Whenever a write operation is to be performed to the S-Port, the CyU3PSibReadWriteRequest() API has to be used with the appropriate parameters. Whenever data is to be read/written to the S-Port, the corresponding commands are to be passed to the S-Port before performing the actual operation. The CyU3PSibReadWriteRequest() API takes care of these commands based on the parameters passed.
Kindly, refer to the fx3_sdk_1_3_3_src for details on this.
Best regards,
Srinath S
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Geethanjali,
Whenever a write operation is to be performed to the S-Port, the CyU3PSibReadWriteRequest() API has to be used with the appropriate parameters. Whenever data is to be read/written to the S-Port, the corresponding commands are to be passed to the S-Port before performing the actual operation. The CyU3PSibReadWriteRequest() API takes care of these commands based on the parameters passed.
Kindly, refer to the fx3_sdk_1_3_3_src for details on this.
Best regards,
Srinath S