- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,iam using S25FL128SAGMF interfaced to cyclone V fpga in my Prototye,Configuration used is Serial Configuration(EPCS).but the device is detecting as EPCQ128 instead of EPCS128 and also iam facing problem in downloading .Jbc File..please suggest
Solved! Go to Solution.
- Labels:
-
Serial NOR
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Please refer to AN98558 and see if you can program the device.
URL for AN98558 - http://www.cypress.com/file/202476/download
Thank you
Regards,
Bushra
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Ramya,
Thank you for contacting Cypress Community Forum. We are working on your case. Will get back to as soon as we find the resolution.
Have a wonderful day
Regards,
Bushra
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello all
I have also the same issue.
Interrested in the new answers
Regards,
Francois
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Ramya, Francois,
Can you try to program it with .jic file? When converting the .sof file to the .jic file, please select EPCS device and disable EPCS ID check.
Please let me if this works.
Thank you
Regards,
Bushra
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
That is exactly what I did !
- Translate .SOF file into .JIC file (convert programming files... on Files sub-menu and in "Advance options" selecting the option to disable EPCS ID check) selecting the other options... FPGA device (5CGX4FC6) and adding the .SOF file...
- Selecting the target device in the JTAG chain (it is a multi devices chain)
- with "Change File" option, add the .JIC file . This automatically add a QSIP flash above the FPGA image
- select the appropriate boxes for programming these devices
- then "Start" button on the programmer...
This fails with the message: device ID doesn't match with the JTAG file ID...
Apparently the disable EPCS ID Check option has no effect 😞
I tried with several Quartus Programmer version : 15.1 - 16.0 - 17.0.1 --- Same results !
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Please refer to AN98558 and see if you can program the device.
URL for AN98558 - http://www.cypress.com/file/202476/download
Thank you
Regards,
Bushra
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi
This new version of AN98558 gives some new tricks and I succeeded in programming my flash
The Cyclone V gets now its configuration bitsteram correctly and "CONF_DONE" brings up at end end of configuration process.
Thanks !
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
In order to program the S25FL256S we had to use the following nios2-flash-override.txt:
[EPCS-010219]
sector_size = 65536
sector_count = 512
(instead of the one indicated in AN98558)
Otherwise AN98558 worked perfectly
Thanks again !