LOW Voltage detection in BLE

[Anonymous]

Hi  ,

I want to use Low voltage detection in my project.But  in the component catalog the LVD component not available.And i checked my ble device

"cyble-222014"   datasheet.in that it says this device supports for LVD.  But in component catalog i didn't find the  LVD component .I don't know

why in component catalog it not at all showing the LVD component

Please help me to resolve the issue.

please find the below attachment.

Thanks in advance.

[Bob_Marlowe · Accepted solution]

Use a GlobalSignal component connected to an interrupt. See datasheet and PSoC4 System Reference Guide (from Creator help) regarding the possible power signals.

Bob

[Anonymous]

Thanks bob

But the problem is to Interrupt is not getting cleared.even if i use  CySysLvdClearInterrupt();

how to clear the inttrupt.

please help me to resolve the issue.

Thanks in advance.

[Anonymous]

Hi bob,

is ble supports Brown out detection?  is LVD and brown out circuit both are same  or different?

if it is different can u tell me how to use brown out circuit in ble

Thanks in advance

[Vasanth]

Hi

They are different. Please check http://www.cypress.com/file/137266/download

Best Regards,
VSRS