- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
hi every one. i have written a firmware for transferring data in slave FIFO mode for CY68013A.
i have download .hex file generated in keiluvision2 to FX2LP. now i want to make .iic file for eeprom.
my problem is when i run hex2bix.exe in utility folder it runs and closes promptly!
i even run hex2bix.c file in visual studio 2008 but the problem is still there.
with cmd i addressed the hex2bix.exe but with using uex2bix command i get the error:
hex2bix does not recognize ...
please help me how can i convert my hex file to .iic
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Amin,
To convert the .hex file to .iic file, follow the below procedure.
- Copy the Hex2bix.exe file and the .hex file to be converted to a particular folder.
- Run the command prompt and navigate to the directory containing the above files.
- Enter the command as below to perform the conversion.
hex2bix -i -c 0x00 -f 0xC2 -o <filename>.iic <filename>.hex
Best regards,
Srinath S
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
please help me if you can....
I'm stucked
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Amin,
To convert the .hex file to .iic file, follow the below procedure.
- Copy the Hex2bix.exe file and the .hex file to be converted to a particular folder.
- Run the command prompt and navigate to the directory containing the above files.
- Enter the command as below to perform the conversion.
hex2bix -i -c 0x00 -f 0xC2 -o <filename>.iic <filename>.hex
Best regards,
Srinath S