- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello, group members.
There is no description on average current at BLE connection interval in PSoC 6 BLE data sheet.
Is there average current value data during connection interval of PSoC 6 BLE?
Best Regards
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello shimizu.hiro-00_1679296,
We have not yet characterized the number for this. However, I can provide you the numbers that we obtained on bench at room temperature.
300 ms Connection interval without any data and with buck @ 3 V supply - 23 uA
100 ms Advertisement current with 31 bytes payload and with buck @ 3 V - 105 uA
We are planning a PSoC 6 BLE application note and that document will provide more numbers and will also provide a simple power estimator tool for modelling power consumption in a BLE design. The document can be expected end of this quarter or early next quarter.
Let me know if this helps.
Regards,
Meenakshi Sundaram R
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello shimizu.hiro-00_1679296,
We have not yet characterized the number for this. However, I can provide you the numbers that we obtained on bench at room temperature.
300 ms Connection interval without any data and with buck @ 3 V supply - 23 uA
100 ms Advertisement current with 31 bytes payload and with buck @ 3 V - 105 uA
We are planning a PSoC 6 BLE application note and that document will provide more numbers and will also provide a simple power estimator tool for modelling power consumption in a BLE design. The document can be expected end of this quarter or early next quarter.
Let me know if this helps.
Regards,
Meenakshi Sundaram R