PSOC4 Programming Issue

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

I have custom PCB with 5 pin programming. Once I was able to program. But now I get the following error while programming using PSOC programmer (updated).

                                                                | Programming Terminated

                                                                | Detected SiliconID: "FF FF 13 AA" is not in database

pastedImage_8.png

While programming on the PSOC Creator I get an errot

Warning: dbg.M0039: There was an error running port acquire: Can not acquire SWD device!

Any idea if this problem can be solved?

0 Likes
2 Replies
RyanZhao
Moderator
Moderator
Moderator
250 sign-ins First question asked 750 replies posted

Hi John,

1. Try to use another MiniProg3 to have a try again.

2. Double-check if there are any caps on SWD trace and remove them.

3. Double-check if SWD_SDA, SWD_SCLK and XRES are connected correctly.

3. Use shorter cable to connect MP3 and device.

4. Which device(MPN) are you using?

More details, refer to:

Troubleshooting PSoC® 3/4/5LP Programming/Debugging Issues - KBA210619

Thanks,

Ryan

0 Likes
lock attach
Attachments are accessible only for community members.
Anonymous
Not applicable

Ryan,

I have tried miniprog3 and kitprog but could not. Do we need to connect external 3.3V power or is it taken from USB? I tried to connect 3.3v also.

Connections are checked to be correct. No caps on SWD and the wires are short (only 4in long)

The MPN is

CY8C4248LQI-BL583

The programmer is labeling as Cortex-M0 and could not be recognized for programming.

ThanksJohn

On Wednesday, January 10, 2018, 4:55:54 PM PST, rzzh <community-manager@cypress.com> wrote:

#yiv8169089174 * #yiv8169089174 a #yiv8169089174 body {font-family:Helvetica, Arial, sans-serif;}#yiv8169089174 #yiv8169089174 h1, #yiv8169089174 h2, #yiv8169089174 h3, #yiv8169089174 h4, #yiv8169089174 h5, #yiv8169089174 h6, #yiv8169089174 p, #yiv8169089174 hr {}#yiv8169089174 .yiv8169089174button td {}

|

Cypress Developer Community

|

PSOC4 Programming Issue

reply from rzzh in PSoC 4 - View the full discussion

Hi John,

 

1. Try to use another MiniProg3 to have a try again.

2. Double-check if there are any caps on SWD trace and remove them.

3. Double-check if SWD_SDA, SWD_SCLK and XRES are connected correctly.

3. Use shorter cable to connect MP3 and device.

4. Which device(MPN) are you using?

More details, refer to:

Troubleshooting PSoC® 3/4/5LP Programming/Debugging Issues - KBA210619

 

Thanks,

Ryan

Reply to this message by replying to this email, or go to the message on Cypress Developer Community

Start a new discussion in PSoC 4 by email or at Cypress Developer Community

Following PSOC4 Programming Issue in these streams: Inbox

This email was sent by Cypress Developer Community because you are a registered user.

You may unsubscribe instantly from Cypress Developer Community, or adjust email frequency in your email preferences

0 Likes