If you are looking for PSoC 6 CAD libraries then they are available here: http://www.cypress.com/cad-resources/cad-library-psoc-6-mcu-family
If you are looking for sample layouts, then you can find the board files and gerbers for the CY8CKIT-062-BLE in the kits webpage: http://www.cypress.com/documentation/development-kitsboards/psoc-6-ble-pioneer-kit
Let me know if this is what you are looking for.
Meenakshi Sundaram R
Thank you for the response Meenakshi,
I'm actually looking for the components to go with the chip (caps, resistors, etc.). I see that there's a .brd. iI that were the component footprints are located? I can't seem to open the file in Eagle due to an error message :
line 1, column 1: Start tag expected.
Well, I have just discovered that those libraries have very incorrect information in them. The 124 BGA component, when I compare with the documentation, is absolutely nothing like the Cypress parts. XRES is A8. The schematic diagram says F1. Beware using this library. Check every pin before you do lots of work. Just ask me why I know all this .