The PSoC 6 BLE Pioneer Kit (CY8CKIT-062-BLE) enumerates as a USB Composite Device as shown in the below image. If you are seeing same, then there are no issues with the driver installtion. Note that the 'KitProg2 USB-UART (COM#)' is used for UART communication and not for programming.
Please check the whether the Switch and Jumper on your kit are in their default position (as shown in the below image) and try programming the kit and see if are able to program/debug the PSoC 6 device successfully.
Thank you for the reply.
In my case, the kit does not enumerate as a USB Composite Device.
However, changing the position of SW7 caused the kit to work.
Thank you very much for the response.