- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Q1: WP # terminal
If Quad command or Write protection is not used in the host system, the WP# pin can be left open, but is there a problem with using the WP# pin fixed at VDD (3.3 V)?
Q2: RESET # terminal
If Quad command or Reset is not used in the host system, the RESET# pin can be left open, but is there a problem with using the RESET# pin fixed at VDD (3.3 V)?
Solved! Go to Solution.
- Labels:
-
Serial NOR
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Yamakoshi San,
You can connect WP# and RESET# pin to VDD (3.3V) . There will not be any problem as long as you are not going to use those pins.
Thanks,
Krishna.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Yamakoshi San,
You can connect WP# and RESET# pin to VDD (3.3V) . There will not be any problem as long as you are not going to use those pins.
Thanks,
Krishna.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Krishna San,
Thanks for your reply.