[Issue] FX3 HD 720p Camera Kit - the "cyfxuvc.img" firmware is not works

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

Hello,

I've just used the "cyfxuvc.img" obtained from URL below to download to RAM of CYUSB3KIT-001.

However, when connect the set of (MT9M114 + CYUSB3KIT-001) to PC, it is wrong regconized as "USB-Serial MFG mode" (See attached image below)

I've checked the "cyfxuvc Source Code.zip" and believe it is made by SDK 1.2.2.

I'm using the latest SDK 1.3.3, so I think this maybe the root cause.

Q1. Could you test the above issue and figure out work arround?

Q2. Could you provide the firmware made by SKD 1.3.3 to test?

02_After-Download.png

Best Regards,

0 Likes
1 Solution
Anonymous
Not applicable

Hi,

Please follow the following steps:

1) Double Click the "USB Serial MFG Mode" in device manager.

2) Go to "Drivers" Tab -> Update Driver -> "Browse My Computer for Driver Software" -> "Let me Pick from a list of Device drivers on my computer"

3) Uncheck the "Show Compatible Hardware" checkbox.

4) Select "Standard USB Host Controller" -> USB Composite Device

Click Next and you will have the Proper drivers binded. You can notice your image sensor under the "Imaging devices" section.

Regards,

- Madhu Sudhan

View solution in original post

0 Likes
1 Reply
Anonymous
Not applicable

Hi,

Please follow the following steps:

1) Double Click the "USB Serial MFG Mode" in device manager.

2) Go to "Drivers" Tab -> Update Driver -> "Browse My Computer for Driver Software" -> "Let me Pick from a list of Device drivers on my computer"

3) Uncheck the "Show Compatible Hardware" checkbox.

4) Select "Standard USB Host Controller" -> USB Composite Device

Click Next and you will have the Proper drivers binded. You can notice your image sensor under the "Imaging devices" section.

Regards,

- Madhu Sudhan

0 Likes