- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
WICED Smart SDK 2.2.0, BCM920737TAG(Rev. 03), mybeacon sample code.
API: bleprofile_configureGpioForSkippingRf(GPIO_PIN_P0, GPIO_PIN_INPUT_HIGH);
When i press the SW1 (pull up the P0), I hope to see that the device will not send adv during this period.
However, from the sniffer, the device is still sending adv.
Any comments?
thanks.
Solved! Go to Solution.
- Labels:
-
SDK 2.X
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Roger,
We have identified a problem with the mybeacon app with respect to the advertisement control patch.
We will have this fixed in the next SDK.
Thanks
JT
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Roger,
Can you send us a screen shot of the sniff?
Let us check with the developers to see if the mybeacon sample code is behaving correctly.
In the mean time, you might want to examine following post.
Re: Callback to modify single advertisments?
Thanks,
JT
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
thanks j.t.
I pressed the middle button (SW1) for consecutive 10s from 14:47:00 to14:47:10.
The adv interval seems to be still 100ms during this period.
BD_ADDR is 0x20736a10aa21.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Roger,
We have identified a problem with the mybeacon app with respect to the advertisement control patch.
We will have this fixed in the next SDK.
Thanks
JT
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi, J.T,
thanks a lot.