- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
We would like to start upgrading a custom board from PSoC 4 to PSoC 6 104 MSCP. Currently we do not feel comfortable doing that without a full reference design, sample BOM included. Is something like this available?
Best,
Nick
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Nick,
Unfortunately, we do not have a reference design with the 104 MCSP part that we can share. However, if you download the PSoC 6 BLE Pioneer Kit Installer, you'll find a reference design for the 116-BGA package, this should be a good starting point for you. Also, we will be more than happy to check your schematic and gerber data once you have designed the board with the MCSP.
Let me know if you have any other questions!
Thanks!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Nick,
Unfortunately, we do not have a reference design with the 104 MCSP part that we can share. However, if you download the PSoC 6 BLE Pioneer Kit Installer, you'll find a reference design for the 116-BGA package, this should be a good starting point for you. Also, we will be more than happy to check your schematic and gerber data once you have designed the board with the MCSP.
Let me know if you have any other questions!
Thanks!