I have some experiences on the 4100 Familly (CY8C4125LQI-483)- Now I need a fifth PWM only available on the 4100s family.
My main issue at the moment is the big difference in the watchdog API between both architecture:
I can setup the WDT delay to my needs i.e: 1.6 secs.
I used to "kick" the watchdog using the CySysWdtResetCounters(CY_SYS_WDT_COUNTER0_RESET); to reset the counter on the 4100,
This function is not present on the 4100s. What can I do to reset the watchdog counter on the 4100s device?
Thanks in advance for your reply.
You will find my setting for the WDT settings in the cydrw in the joined picture.
You can find the cy_lfclk Component Manual at following page.
PSoC 4 Low-Frequency Clock (cy_lfclk)
Two types of WDTs are described in this document.