S25FL128S block protect

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

Hi,

     my product use nor flash S25FL128S , I want to implement the write protect fucntion.

     I already setted the status register to 0x14 (BP0-2 = 0b101), and setted configuration register to 0x28 (TBPROT = 1).

     The flash behave is flash be protected the address start from the top,  but I want protected address start from the bottom.

     Question:

     1.  How can i implement my idea,  flash be protected the address start from the bottom.

      2. you have example to me?

0 Likes
1 Reply
Anonymous
Not applicable

Hi,

Please clarify the below queries..

Can you please provide the full part number which you are using. Are you observing the same issue with any other device ? If possible send the image of the device showing the part marking.

did you program TBPROT bit after performing any  program or erase operation ?

TBPROT must not be programmed after programming or erasing is done in the main flash array.

Thanks,

Krishna.

0 Likes