- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
1)I am using psoc creator for development of CY8C4125LQS-S433 device , as per family data sheet
it has 3 SCB block , but if i include 3 scb as i2c, spi and uart then this error is coming
:Resource limit: Maximum number of Serial Communication (SCB) exceeded (max=2, needed=3).
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi ,
Go to ordering information page. The device you are using does not have 3 SCBs. Some other devices in the 4100 family have.
Best Regards,
VSRS
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
The datasheet only lists 2 SCB blocks for 4125 devices. Could you show me the screen shot were it says 3SCBs?
Best Regards,
VSRS
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi vsrs , i had refered this family data sheet http://www.cypress.com/file/230626/download .
In page 5 it is written
Serial Communication Block (SCB) The PSoC 4100S has three serial communication blocks, which can be programmed to have SPI, I2C, or UART functionality.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi ,
Go to ordering information page. The device you are using does not have 3 SCBs. Some other devices in the 4100 family have.
Best Regards,
VSRS
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks VSRS for correcting me .
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
No problems
Happy Designing
Best Regards,
VSRS