How to connect Arduino sensor to Solar Powered IoT Device Kit?

Announcements

From sunburn to sun earn – we’ve got the power! Watch our #poweringgreen videos now.

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

I have an Arduino setup with a temperature and humidity sensor and would like to transfer this to the Cypress Solar Powered IoT Device Kit. Which pins would I add these sensors to and how would it be programmed? Thanks.

1 Solution
EijiF_46
Employee
Employee
10 likes received First like received

Does the "Arduino setup with a temperature and humidity" mean that your would like to connect I2C sensors to Solar-Powered IoT Device?

If yes,  you can connect the sensors to pin 8 and 9 of J2.

Connector of IoT Kit.png

Regarding how to program, refer to "7.2 PSoC Creator with MiniProg3 (Program and Debug)" on the kit guide.

http://www.cypress.com/file/187321/download

Regards

Eiji

View solution in original post

2 Replies
Anonymous
Not applicable

Did you ever figure out how to get the arduino sensor setup alexander?

0 Likes
EijiF_46
Employee
Employee
10 likes received First like received

Does the "Arduino setup with a temperature and humidity" mean that your would like to connect I2C sensors to Solar-Powered IoT Device?

If yes,  you can connect the sensors to pin 8 and 9 of J2.

Connector of IoT Kit.png

Regarding how to program, refer to "7.2 PSoC Creator with MiniProg3 (Program and Debug)" on the kit guide.

http://www.cypress.com/file/187321/download

Regards

Eiji