Featured Discussions
你好!
在NORMAL状态下,我用WriteRow写NAR时报0xF00000AA(Writes are disabled in safety register)错误,
请问是什么原因?另外,可否提供使用WriteRow的例程?谢谢!
Ti gave a link to Cypress telling to download the driver, the link is as follows
https://community.cypress.com/docs/DOC-12366 but the link says it's archived and can't be downloaded
The normal FX 3 driver won't work again, can you share this driver with me?
smartconx_target@Q!w2e3r4t5y6u7i8o9p0||/t5/USB-EZ-PD-Type-C/%E5%AF%BB%E6%89%BE%E9%80%82%E9%85%8DTi%E7%9A%84%E9%A9%B1%E5%8A%A8/td-p/741911
Show LessHi, I am using the ICE2HS01G in a high voltage application.
Sometimes, the IC does not go into burst mode and keeps switching continuously even with the LOAD pin pulled down to ~0V by the feedback control based on the TL431 IC.
Is this a reported issue with noise, perhaps on the Vsense line?
Thanks,
SS1
Show LessHello,
I am looking for the Firmware project (Eclipse Project) for the OV7251 Image Sensor. Even a simple implementation that offers the following functionalities will be sufficient:
- UVC-compliant output
- 640x480 pixel resolution
- Raw video
Does anyone have a project that can be shared?
Thanks in advance,
Mo
Show LessHi,
I am programming the IR35204 Chip.
Loop1 Vout is successfully shown our setting.
But Loop2 Vout has a low level and looks like a noise.
is there a any solution about Loop2 Operation successfully?
Please Let me know
Thank you for your help
Show LessHi,
I want to translate the following article to Japanese. Please confirm to my work.
KBA "Where to check when there are errors changing Build Configuration from Release to Debug"
URL: https://community.infineon.com/t5/Knowledge-Base-Articles/Where-to-check-when-there-are-errors-changing-Build-Configuration-from-Release/ta-p/741600
Best Regards,
Hayashi.K
Hi,
I want to translate the following article to Japanese. Please confirm to my work.
KBA "Short circuit safe operation area of IM241 CIPOS™ micro IPM series"
URL: https://community.infineon.com/t5/Knowledge-Base-Articles/Short-circuit-safe-operation-area-of-IM241-CIPOS-micro-IPM-series/ta-p/740439
Best Regards,
Hayashi.K
Hi,
I want to translate the following article to Japanese. Please confirm to my work.
KBA "Set and modify the stack size for PMG1 code examples in ModusToolbox™"
URL: https://community.infineon.com/t5/Knowledge-Base-Articles/Set-and-modify-the-stack-size-for-PMG1-code-examples-in-ModusToolbox/ta-p/740409
Best Regards,
Hayashi.K
Hi,
I want to translate the following article to Japanese. Please confirm to my work.
KBA "Speed sensor's type of hysteresis"
URL: https://community.infineon.com/t5/Knowledge-Base-Articles/Speed-sensor-s-type-of-hysteresis/ta-p/740399
Best Regards,
Hayashi.K
We use an Infineon FP 420 L 90 B magneto-resitive sensor to sense position in a precision tilt mechanism, but Infineon no longer makes this part. Does anyone know of a replacement part made by Infineon or another vendor that could take the place of this device?
Show Less