- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
We use WICED SDK 3.1.1 and the Inventek module ISM43362_M3G_L44 which uses the STM32F205 processor.
below is our code. We try to create two sockets on the AP interface
void application_start( )
{
........
/* Bring up the soft AP network interface */
if (wiced_network_up( WICED_AP_INTERFACE, WICED_USE_INTERNAL_DHCP_SERVER, &device_init_ip_settings)!= WICED_SUCCESS)
{
WPRINT_APP_INFO(("Bring up the soft AP network interface failed\r\n")); //never get here
}
/* Create a TCP server1 socket */
if (wiced_tcp_create_socket(&tcp_server1_handle.socket, WICED_AP_INTERFACE) != WICED_SUCCESS)
{
WPRINT_APP_INFO(("TCP command socket creation failed\r\n"));//never get here
}
/* Create a TCP server2 socket */
if (wiced_tcp_create_socket(&tcp_server_handle.socket, WICED_AP_INTERFACE) != WICED_SUCCESS)
{
WPRINT_APP_INFO(("TCP socket creation failed\r\n"));//never get here
}
/* wifi netwok interface is broken here at power-up, but not jtag loading*/
while(1)
}
we use an android tablet and it can always connect to the wifi ap interface after jtag loading image, but it cann't connect to the the wifi ap interface(" the wifi ap interface not in range") when powering cycle the board after jtag downloading was done..
We can't see this issue in SDK 2.4.1.
Can you investigate this?
Thanks
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi
I also see this issue above on SDK 3.1.2.
Thanks
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I have copied the above sample to .../apps/snip/tcp_server snip application and run it on the BCM943362WCD4 module and it works as expected.
The BCM943362WCD4 and ISM43362_M3G_L44 modules are identical modules. Both uses the STM32F205 as host MCU and same BCM43362 WiFi radio.
Take a clean copy of the Wiced SDK-3.1.2 and try the .../apps/snip/tcp_server snip application with above updates.
Thanks,
Seyhan