5 Replies Latest reply on Apr 11, 2017 6:26 PM by MikeMitchell

Debugger stops on startup without breakpoint

MikeMitchell Apr 12, 2017 11:02 PM

Working on some changes and suddenly the debugger always stops here ->>>, but there are no breakpoints set:

void cyfitter_cfg(void) {     /* Disable interrupts by default. Let user enable if/when they want. */     CyGlobalIntDisable;      /* Enable the clock in the interrupt controller for the routed interrupts */  ->>>   CY_SET_REG8((void *)CYREG_UDB_UDB_INT_CLK_CTL, 0x01u);

There are no warnings, so I have no idea what I changed to cause this. Are there other reasons the debugger would trap, and how can I isolate them?

1. Re: Debugger stops on startup without breakpoint

IanF_56 Apr 4, 2017 4:47 PM (in response to MikeMitchell)

Hello Mike,

Can you provide the following information:

Part Number
PSoC Creator version
PSoC Programmer version
MiniProg3/KitProg version


Ideally it would also be great if you could provide your project and user.config file. Your user.config file can be found here:
C:\Users\<USERNAME>\AppData\Local\Cypress Semiconductor\PSoC Creator\<CREATORVERSION>

Thanks,

Ian Fyall
Like Show 0 Likes(0)

Actions
2. Re: Debugger stops on startup without breakpoint

user_242978793 Apr 4, 2017 5:34 PM (in response to MikeMitchell)

Please post your complete code.
Like Show 0 Likes(0)

Actions
3. Re: Debugger stops on startup without breakpoint

MikeMitchell Apr 5, 2017 10:05 AM (in response to MikeMitchell)
CY8C4248AZI-L485

PSoC Creator 4.0 Update 1 (4.0.0.432)

PSoC Programmer 3.25.0

MiniProg3 2.05 [3.08/2.08]

Project is similar to CY8KIT_046_USB_Audio. But confidentiality prevents me from posting my whole project. If a cypress employee emails me I can send it that way.

The problem has come and gone and come back on the same code.

user.zip 13.2 K
Like Show 0 Likes(0)

Actions
4. Re: Debugger stops on startup without breakpoint

AnkitaS_51 Apr 10, 2017 2:03 AM (in response to MikeMitchell)

You can look into tis for some help-

http://www.cypress.com/forum/psoc-creator-software/psoc-creator-project-corruption-problems-debugger
Like Show 0 Likes(0)

Actions
5. Re: Debugger stops on startup without breakpoint

MikeMitchell Apr 11, 2017 6:26 PM (in response to MikeMitchell)

I can't say for sure if that was the solution, but after disabling the linker option to remove unused code, it seems to have gone away. Thanks.
Like Show 0 Likes(0)

Actions

Go to original post