EZ-USB FX2 drivers for windows 7

[Anonymous]

Hi,

   

How can I get EZ-USB FX2 drivers for windows 7?

   

Let me know.

   

thanks in advance,

   

--Sarath.

[Anonymous]

Hello Sarath,

   

You can download the driver from the following link:

   

http://www.cypress.com/?rID=34870

       

Regards,

   

Anitha

   

[Anonymous]

Not run Windows 7 64 bit mode.

[Anonymous]

http://www.cypress.com/?id=4&rID=37913

[Anonymous]

Hi, My OS is Windows 7 & 64bit

   

I download the driver from the following link   http://www.cypress.com/?id=4&rID=37913 .

   

EZ-USB FX2 Driver is not success

   

Thanks

       

[Anonymous]

 http://www.cypress.com/?id=4&rID=53338

[Anonymous]

 EZ-USB driver came with the installation software of our Ambios XE-70 unit does not work on Windows 7.

   

Ambios manual gives installation procedure for EZ-USB Anchor Panel. However the driver on the CD works for Windows Vista and not on Windows 7.

   

Could you please tell us where we can get the EZ-USB Anchor Panel installable for Windows 7?

[Anonymous]

When you say EZ-USB driver I assume you're talking about ezusb.sys. If so please look at http://www.cypress.com/?app=forum&id=167&rID=42437

   

Regards,

   

Anand

[Anonymous]

In Windows 7 64-Bit, the driver installation fails saying that there is no compatible driver found.  Any updates to this?

   

Thanks,

   

Bill

[Anonymous]

 Hi,

   

          How did you try this? Place both inf and sys file in the same folder and when the device comes up point to this folder. Which driver are you using?

[Anonymous]

hi,

   

 i have a EZ-USB FX2 on Windows 7 64 Bit.

   

I installed the USB Development tool:

   

http://www.cypress.com/?rID=34870

       

When i plug in my module with the FX2 windows says "unknown device"

       

please help!

   

[Anonymous]

 Hi,

       

Please follow: http://www.cypress.com/?app=forum&id=167&rID=42437

       

Regards,

   

Gayathri

[Anonymous]

I have a CY7C68013A IC,

       

Is there a way to use EZUSB FX2 on Win7 Pro x64 ?

   

I downloaded  the Cypress USB suite 3.4.7 but I didn't found a solution.

       

callisto.

[Anonymous]

 Hi,

       

The CyUSB.sys that comes with SuiteUSB 3.4.7 should work fine with FX2. What is th error message that you are seeing in device manager? Have you added the VID / PID entry for FX2 in the CyUSB.inf? Which is the OS that you are using? Are you using the inf from the appropriate folder as per the OS?

       

Regards,

   

Gayathri

[Anonymous]

What will be VID and PID for CY7C68013A-56 part?

[Anonymous]

Hi ,

       

By default FX2LP (Cy7c68013A) has the VID/PID 04B4/8613(for all packages).  You can change the VID/PID by programming the FX2LP

   

For more details refer the application note in the link http://www.cypress.com/?rID=34253

   

Regards,

   

Vikas

[Anonymous]

I got old Ancore dev (AN2131) Top2003 and I must switch from Win 7 x32 to Win 8.1 x64.

   

Which driver to install? I already try few with disable WHQL-enforcing but AN2131 is shown as Unknown device.

   

Thanks

[Anonymous]

 Hi ,

       

Please install Cy3684 DVK http://www.cypress.com/?rID=14321,

       

You can use the drivers available with the kit contents

       

Regards,

   

Vikas.

[Anonymous]

We got also an old Ancore AN2131Chip and actually it's used under Win7-32 bit still with very driver for W2K.

   

Under WinXP everthing seems to work Ok , but now using it with Win7 it seems, that there are some unexpected problems with the USB interface.

       

Where can we find/download suitable driver or which driver is recommanded by Cypress for that chip?

       

Or is there a pin compatible chip available?

       

Thanks a lot!

   

Ralph

[Anonymous]

 Hi,

       

AN2131Chip  is a obsolete part and we don't have drivers for that part.

       

You can try with the drivers provided with FX2LP DVK http://www.cypress.com/?rID=14321.

       

After installing you can get the drivers in the path "C:\Cypress\USB\CY3684_EZ-USB_FX2LP_DVK\1.1\Drivers".

       

Regards.

   

VIkas

[Anonymous]

 You can try with the drivers provided with FX2LP DVK http://www.cypress.com/?rID=14321.

       

After installing you can get the drivers in the path "C:\Cypress\USB\CY3684_EZ-USB_FX2LP_DVK\1.1\Drivers".