- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I am using the CY22393 for an application that will us the cypress chip to configure the PLLs using the I2C port and generate a desired clock frequency.
I know that is what the CyberClock sofware is capable of doing.
Is there C code already out there to generate the P,Q, D for a given PLL to generate a desired frequency? If so, could you please let me know where to find such app?
Thanks,
Miguel.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Miguel,
There is no C code released. The information that is released is part of An Algorithm To Help Calculate P & Q Values - Cypress Semiconductor KB article that can be found at link: http://www.cypress.com/?rID=27709.
I believe you are aware that using I2C you can only program the volatile memory, not the non-volatile memory. So you would have to program the device at every power-on with your new configuration using I2C. The part is not designed to program the non-volatile memory using I2C.
You can check the following Kb Articles that you will find useful:
Serial Programming PLL1 Frequency Changes In The CY22393/4/5 ...
Serial Programming Sequence in CY22393/4/5 - Cypress Semiconductor
CY22393/4/5 JEDEC breakdown - Cypress Semiconductor
Let me know if there are any further questions!
Regards,
Mohnish.